UltraGauge Blue Phone Mount
Phone Mount for use with UltraGauge Blue
$35.00
RRP $45.00
SAVE $10.00 (22%)
In Stock
The Windshield mount attaches directly to the inside surface of the windshield. The ball can be locked in place with the included locking ring.
Installation Instructions:
- The windshield must be completely clean, dry and smooth. If the surface is not prepared properly the suction cup seal will eventually fail.
- The suction cup is protected by a thin plastic sheet which must first be removed.
- The silicon suction cup becomes less flexible with cold temperatures.
- The silicon suction cup must be pressed firmly against the windshield.
- Once the suction cup is firmly against the glass and flat against the glass, press the locking tab to create the suction which will adhere the suction cup to the glass.
- Adjust the mount's swivel head as desired and then very lightly tighten the locking ring.
- Insert phone into the bracket.
It is generally best to only lightly tighten the locking ring, so as to allow the ball swivel to still operate and hold its position.
(491)
SKU | 491 |
Shipping Weight | 0.1500kg |
Shipping Width | 0.200m |
Shipping Height | 0.100m |
Shipping Length | 0.150m |
Shipping Cubic | 0.003000000m3 |
Be The First To Review This Product!
Help other Precise Auto Pty Ltd users shop smarter by writing reviews for products you have purchased.