The vertical mount is designed to adhere to vertical surfaces on the dash face. The mounting head features 360 degree rotation and can be moved up/down and left & right, thanks to the ball and socket design. The mounting bracket, included with UltraGauge, fits into the "T" notch located on the face of the swivel assembly. The base is flexible allowing it to take the shape of curved surfaces, as shown above. The base can also be trimmed in size with a scissors to aid in custom installations. The mount features a very high quality 3M™ adhesive
Unlike the Windshield mount, the vertical surface mount has the potential to mount UltraGauge so that it can not easily be seen from outside the vehicle.
- The surface to which the fastener is attached must be clean, dry, and oil and grease free. Clean the surface, even if it appears clean.
- Avoid leaving the adhesive exposed for longer than 3 minutes after removing the protective backing.
- The adhesive is pressure sensitive. Work the surface to ensure all areas of the adhesive are activated.
- After application, and for maximum adhesion, allow the adhesive to set for 1 hour before use.
- When attaching the UltraGauge mounting bracket to the Vertical mount head, it is not necessary to fully seat the bracket. Slide the bracket onto the "T" notch until the bracket will no longer slide easily.
- Once the bracket is in place, UltraGauge can be snapped into the bracket.
Once removed from its protective bag, the vertical mount can not be returned for a refund. Because the adhesive performance is customer installation dependent, the adhesive has no warranty.
The adhesive is for single use only. If the above instructions were not followed and the adhesive has failed, the adhesive is end of life. The adhesive is a high quality 3M™ adhesive and the only known reason for failure, is failure to follow the above instructions. Some have reported that after they failed to follow the above instructions they had some luck following the "Failed Installation" instructions associated with the windshield mount.
|Base dimensions||2.0" x 2.8"|
|Base to Mount face||1.44"|
Be The First To Review This Product!
Help other Precise Auto Pty Ltd users shop smarter by writing reviews for products you have purchased.