MouseBlocker 1000x

• Whisper quiet operation (to humans)
• Outputs 2 types of ultrasonic waves simultaneously
• 4 long range speakers for full space coverage
• Covers 93 square meters with a clear line of site
• Perfect for a 2 car garage or large space
• 240v AC Power plug

The MouseBlocker 1000x utilizes advanced micro-electronics technology to emit two types of specialized ultrasonic waves simultaneously. These waves effectively target the hearing and nervous systems of rodents, creating an unpleasant and uncomfortable environment for them. Its primary purpose is to deter mice and drive them away from protected areas. The 1000x generates constantly changing and alternating frequencies, ensuring that rodents cannot adapt or become immune to the sound.

Coverage Area
With its powerful output, the MouseBlocker 1000x covers an expansive area of up to 93 square meters, provided there is a clear line of sight. It’s important to note that the unit operates through sound, meaning the noise will not penetrate walls or solid objects. For optimal performance, position the unit with the speakers facing an open space free of obstructions.

Operating Instructions
To begin using the MouseBlocker 1000x, follow these simple steps. Start by plugging one end of the provided power cord into the power socket located on the left rear side of the unit. Then, connect the other end of the power cord to any available 240v power outlet. Once the unit is plugged in, it will immediately start functioning. Look for a solid green power light and a flashing/blinking blue ultrasonic light indicating the sound output.

Testing Output: On the back of the unit, you will find a green test button. Pressing this button will amplify the ultrasonic noise to an audible level, allowing you to verify that the microprocessor is working correctly. Please note that this test noise is quite loud.

Precautions
For optimal performance and safety, please adhere to the following precautions:

1. Avoid using the device outdoors, in high-temperature locations, or damp areas.
2. The MouseBlocker 1000x should be used continuously, without interruption, to maintain its effectiveness.
3. Ensure that there are no obstructions in front of the unit, as ultrasonic noises do not pass through solid objects.
4. The device features four loud speakers installed in three directions. To maximize its effectiveness, install the unit along a wall with the back facing the wall.
5. It is normal for the device to feel warm to the touch during operation.
6. The unit’s effects will be noticeable immediately after powering it on. For optimal results, use the device continuously for 3-4 weeks. Initially, you may observe increased rodent activity as they become irritated, but with prolonged use, the mice will begin to disappear.

Unit Technical Specifications
AC Power Voltage: AC 120-240v 60hz
Power Consumption: 25Watts
Frequency Coverage: 25-45Khz Intermittent at 160 Seconds
Made in China EPA Est No: 95016-CHN-1

Unit Dimensions: 10″Wide  x 6″Tall x 8″Deep